10 Myths Your Boss Is Spreading Concerning Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

It is crucial to wash and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However, if you have double-pane windows that are held in place by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this instance, you will need to locate some plastic spacers that will assist the new pane to fit correctly into the frame of the window.

If you're planning attempt to remove the window panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor, where they could be trampled.

It's a good idea to cover the gap with tape after the glass is removed. This will stop water and drafts from entering your home until a professional is able to fix the window. This will also act as a barrier, installed preventing any intruders from getting access into your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. Over time, they can develop a number of problems that include sliding. A sagging window can cause problems with light, draughts, and even security. It's crucial to act when you realize that your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need open the window to access the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close your window and test it for an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it can be caused by the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need close your window and do an initial test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

It is important to take action if you awake each day to discover mouldy walls and wet floors. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the old caulking might need to be removed before a fresh layer can be applied. It is important to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and reduce the efficiency of your energy.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. A upvc window repair specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it blows open with the breeze. They can be easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like any mechanical part, hinges can wear out over time. It's easy to change a window hinge, but it's simpler if you have someone to help hold the frame.

Verify that the uPVC hinges are closed and open in the proper direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should open.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or due to poor installation at the factory. Sending us a photo through our website can often resolve the problem. We are always happy to give assistance.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause gaps to develop where the sash joins the frame. They can be repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. In addition, the interlock could be unbalanced. This happens on the hinge side and could require to be cleaned. In some instances, it may be necessary to replace them.

The second most frequent cause of draughts is the window seals. They can become worn down or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs windows made of upvc will provide a great level of security and insulation for your home. It is crucial to recognize that windows last for a certain period of time and eventually, they will reach the point when it's more efficient to replace them than fix them. If you have any problems with your upvc window, it's best to consult an expert as soon as possible.